Product Introduction

The power distribution unit is used for the distribution and management of power supply for server cabinets in the central computer room, providing overload and short circuit protection for servers at the end. The internal components are selected as miniature circuit breakers, which have reliable performance, working voltage of 220V (DC-48V), and rated current of 125A. The maximum number of modules is 24, and the commonly used height is 3U or 4U

Product Features

Adopting standard 19 inch 3U/6U plug-in distribution modules, it can achieve front maintenance of the cabinet, improve the maintainability of the system, and achieve online expansion. The module is equipped with 18 built-in current detection components and switch status monitoring circuits, which can collect and report information such as switch current, voltage, kilowatt hour, active power, reactive power, power factor, total harmonic current, total harmonic voltage, switch status, etc. for each branch.

Power management

Provide comprehensive power management functions for the data center, fully integrating the power distribution system into the computer room monitoring system. The monitoring content includes not only all electrical parameters of the main busbar and branches of the electrical system, but also the quantitative management of parameters such as power statistics, load rate, and various wave content of each branch, backup switch management, and minute power off function of each branch. It can generate accurate power reports and historical energy consumption curves for all branches, and carry out green management of energy consumption in the data center.

Complete power monitoring

DFP-18 provides comprehensive monitoring of server power supply and informs in advance of potential risks in the computer room power supply system, such as overvoltage, undervoltage, branch power outages, overload, and other abnormal conditions. Users can detect security risks early and take corresponding improvement measures to improve the power supply situation in the computer room, effectively avoiding potential risks. The branch system of DFP-18 is equipped with two threshold alarms, eliminating the danger of overload and preventing accidents caused by switch overload tripping. Users can program level 2 alarms and pre alarm functions to achieve preventive handling. DFP-18 can instantly calculate the load rate of each circuit breaker, providing assurance for the safe operation of the system.